CS9662 Hydraulic oil boost and stop leak blended from synthetic base stocks and proprietary additives. It works to stop leaks in seals, enhance lubricity, and decrease wear to increase the life of a hydraulic fluid.
CS9662 is compatible with petroleum-based mineral and synthetic fluids. Not for use with water-glycol or phosphate ester fire-resistant hydraulic fluids.
Treat rate is 1% of system intake.
1-quart treats 25 gallons
1 gallon treats 100 gallons
5 gallons treats 500 gallons
Available in quarts and gallons.
• Protects against wear, rust and corrosion
• Increases existing fluid life
• Stops leaks in seals
• Controls carbon and varnish to help reduce deposits
Tractor Hydraulic Fluid Stop Leak is an amazing and versatile performance enhancing oil conditioner and additive. This hydraulic oil stop leak can benefit the equipment operator by helping to reduce or stop oil leaks. It may help extend the life of equipment and of seals & gaskets. This hydraulic oil conditioner will help reduce friction and reduce wear. This high performance lubricant conditioner/additive will boost your oil’s ability to reduce foam. In addition, this hydraulic oil additive will help reduce rust and oxidation.
Its unique high performance chemistry can help rejuvenate seals and gaskets. This additive’s unique proprietary formulation utilizes the absolute highest quality, highest performing lubricant additives available. It will make ordinary industrial lubricants perform in a superior fashion and it will make specialty high performance lubricants perform even better.
One of the biggest culprits in the reduction of performance and standard brand hydraulic and gear oils is foaming. Foaming causes a multitude of problems in heavy equipment operation. Foam causes temperatures to skyrocket in equipment. These higher temperatures will snowball in a negative fashion, leading to excessive metal parts wear, cavitation, corrosion, oil leaks, and ultimately equipment failure. None of these issues will help reduce downtime.
To combat and try to minimize these problems, Tractor Hydraulic Fluid Stop Leak is formulated to help solve these problems. Regardless of whether you use ordinary standard grade lubricants of top of the line specialty oils, you can benefit by using this hydraulic oil conditioner. This hydraulic oil additive contains the most advanced, highest quality non-foaming additives available. By adding this additive to your oil, it will immediately help release air from an enclosed system, whether we are talking about hydraulics or gear boxes. By decreasing the foaming in your hydraulic oil or gear oil, you will greatly reduce heat. By reducing heat, you extend the serviceable life of you oil, of any seal or gasket material, and ultimately extend the life of your equipment.
Reduces / Stops Leaks
Tractor Hydraulic Fluid Stop Leak was formulated to help reduce or stop oil leaks that have been caused by damaged seals and gaskets. You can anticipate oil leaks to slow down dramatically or stop completely through the use of \this hydraulic oil additive. What is actually happening that is causing the leaks to occur in the first place? Foam in a lubricant tends to trap heat or act as an insulation, thus keeping heat in with both hydraulic and gear systems.
Through extended heavy loads and use of your equipment, the foam tends to increase which leads to higher temperatures, which in turn will degenerate seals and gaskets. As seals and gaskets become worn or damaged, they are prevented from functioning (stop oil from leaking out.) To solve this problem with seals and gaskets, this hydraulic oil conditioner utilizes a proprietary seal swelling chemistry. This unique formulation does an amazing job at rejuvenating seal and gaskets to the point where they are able to function again in stopping oil leaks.
Another benefit in using Tractor Hydraulic Fluid Stop Leak is its ability to help reduce wear of critical lubricated parts. Again, Tractor Hydraulic Fluid Stop Leak is formulated with the absolute finest anti-wear additives available. Typical standard brand lubricants are formulated with the bear minimum amounts and quality of anti-wear additives. By adding this quality hydraulic oil conditioner, you are in fact boosting substantially the anti-wear level in your hydraulic and gear systems. By using Tractor Hydraulic Fluid Stop Leak, your equipment can now function in the most extreme environments and be protected because of the superior anti-wear additives in this high performance lubricant. Expect less wear, thus extending the life of your equipment.
By utilizing or adding this additive to your standard gear oil or hydraulic oil, you are improving your oil’s life and performance capabilities. Tractor Hydraulic Fluid Stop Leak’s high performance formulation utilizes heavy duty antioxidants and rust & corrosion inhibitors. This additive greatly enhances standard or traditional hydraulic oil’s ability to control oxidation, rust, and corrosion. The R&O additives found in this hydraulic oil conditioner will protect your equipment and oil, allowing them to perform at a much higher level in extreme operating conditions. Typically, standard or name brand industrial lubricants very often are deficient in both the level and quality of key additives utilized in their formulation and manufacturing. Yet in certain situations, it may not be feasible to utilize a premium grade industrial lubricant because of oil leakage, hose breaks, or jeopardized heavy equipment.
In these instances, utilizing Tractor Hydraulic Fluid Stop Leak is the perfect cost effective alternative in turning your standard lubricant into a high performance performer. In summary, this quality additive is blended utilizing premium quality base oil stocks, and a high performance quality additives, state of the art rust and oxidation package. These additives will improve anti-wear, increase an oil’s ability to fight foam, and help rejuvenate seals and gaskets.
TYPICAL LUBRICANT PROPERTIES
CS9662 Grades 46
Viscosity Index 109
Viscosity cSt @ 40°C 47
Viscosity cSt @ 100°C 7.1
Flash Point °F (°C) 435(223)
Pour Point °F (°C) -35 (-37)
Rust Test Pass
Copper Corrosion, 24 Hr 1b